A-4 Skyhawk Ducted Fan Jet

22" wingspan, 29" long, 155 sq. in. wing area, 16 oz. flying weight. All hollow molded foam construction, completely pre-painted and ready for assembly. The surface of the foam is toughened and the areas on the bottom of the jet that contact the ground are made of tough plastic. The ducted fan unit is included (EDF 60/15 Mk. 2). The flight performance of this jet is simply amazing; it can easily ROG (rise off grass), and with our recommended JetScreamer motor the speed is blistering. Vertical performance is unlimited (OK, it is limited, but only by the pilots ability to keep the airplane in sight). The delta wing is very gentle in stall and slows well for soft landings. Slow speed performance is excellent and hand launching is easily done. With the addition of the optional wheel kit (ALF104W) take offs and landings from smooth surfaces are possible. Assembly is fairly easy; the wing is one piece and is glued to the fuselage after the aileron servo is installed. The ducting is smooth and elegant in design. The canopy is pre-done and is held in place by a magnet giving quick and easy access to the flight battery. Balance is critical on this airplane. The optimum balance point is molded into the bottom surface of the wing for easy reference. Waterslide decals for 3 versions of the A-4 are provided along with helpful instruction on their application. Total assembly time is about 6-8 hours. For 3-channels: Ailerons, Elevator and Throttle.

A-4 Skyhawk PDF Instruction Manual

A-4 Skyhawk PDF Wheel Instructions

A-4 Skyhawk PDF Cooling Modification

Here's how it comes out of the box. Colorful waterslide decals for 3 different versions included.

Online Reviews of the A-4 Skyhawk RC Jet:

RCGroups.com Reveiw
Fly RC Magazine PDF Review

Join the A-4 Skyhawk discussion on RCGroups.com