Connectors and Wiring for Motors, Motor Controls, Battery Packs from Hobby Lobby!

To 5 Amps:
Ultra light micro connectors
	POT015 Ultra Light Micro Connectors, 5 ..... $ 8.60 AVAILABLE NOW Tiny 3/32 x 3/16" plastic body, 15/32" overall length, weight only 0.01 gram each. Reliable connections as pins can't loosen like others. Pack of 5 polarized connectors.

To 10 Amps:
Deans Connectors - excellent for electric Slowflyers
Tiny, light, reliable. Tighten the female connectors occasionally by inserting a pin in the outside of their sockets to force the two jaws together.	DEA002 Deans 2 Pin Connectors, 2 ..... $ 2.30 AVAILABLE NOW DEA002P Deans 2 Pin Polarized Connectors, 2 ..... $ 2.30 AVAILABLE NOW DEA003 Deans 3 Pin Connectors, 2 ..... $ 2.30 AVAILABLE NOW

The connectors used on micro helicopters
BAT229 on left, BAT228 on right	BAT228 JST Charger Connector with Wires ..... $ 2.90 AVAILABLE NOW 7" length. This is normally used as a charging lead and on speed controllers and motors for micro electrics. Female plastic connector which mates to BAT229. BAT229 JST Battery Connector with Wires ..... $ 2.90 AVAILABLE NOW 7" length. This is normally used on slowflyer and micro electric aircraft battery packs and speed controllers for motor connection. Male plastic connector which mates to BAT228.

Plug & Fly connectors for SPEED 400
	GR2978 MG-6 Male Connector ..... $ 2.60 AVAILABLE NOW GR2979 MG-6 Female Connector ..... $ 2.60 AVAILABLE NOW

To 20 Amps:
Tiny Polarized connectors for SPEED 400 use
One Polarized Connector set consists of: 1 plastic holder with a single male and single female connector. Example: To connect a nicad pack to a battery charger you need 2 Polarized Connectors. Gold plated connectors. Tiny: the male connector is .86" long. The red plastic polarized holder is .98" long. One Polarized Connector set weighs 1.81 grams. HLFK4004 is same as HLFK4003 but have yellow plastic polarized holders.	HLFK4003 Polarized SPEED 400 Connectors, 3, Red ..... $ 8.30 AVAILABLE NOW HLFK4004 Polarized SPEED 400 Connectors, 3, Yellow ..... $ 8.30 AVAILABLE NOW HLFK4013 Polarized SPEED 400 Connector, 1, Red ..... $ 3.10 AVAILABLE NOW HLFK4014 Polarized SPEED 400 Connector, 1, Yellow ..... $ 3.10 AVAILABLE NOW

To 35 Amps:
Powerpole Connectors!
1" long. Pack of 2 Red, 2 Black. Neither male nor female but universal.	SER003 Powerpole Connectors, 4 ..... $ 3.00 AVAILABLE NOW The plastic bodies join together in a variety of ways for polarization purposes. Solder your wires into the big 1/8" ID hole in the silver-plated contact. Reasons to use Powerpole Connectors: (1) Resistance of the mated connectors is very low (this prevents loss of power). (2) Large high capacity wires — easily fit into the holes in the pins.

40 Amps and Higher:
Deans Polarized Ultra Plug
Male and Female connectors with shrink tubing. Highly efficient, small, lightweight, high-power connector.	DEA1300 Deans Ultra Plug Connector, pair ..... $ 3.50 AVAILABLE NOW DEA1302 Deans Ultra Plug, Male, 2 ..... $ 3.90 AVAILABLE NOW DEA1303 Deans Ultra Plug, Female, 2 ..... $ 2.90 AVAILABLE NOW

Gold Stecker connectors with polarized housings
(Similar to photo)	HLFK6326 Kavan Polarized Gold Stecker Connectors, 2 Sets ..... $ 7.90 AVAILABLE NOW Will take huge wire — up to 4.7mm OD or 4mm sq.. For 40 Amp constant current and much higher short term current.

Jeti's Gold Plated Brushless Connectors
	JEC001 Jeti 3.5mm Gold Plated Female Connector, 3 ..... $ 3.90 AVAILABLE NOW JEC002 Jeti 3.5mm Gold Plated Male Connector, 3 ..... $ 6.40 AVAILABLE NOW 1/2" long, 3.5mm diameter. This is the same connector that comes on our Jeti 30-3P and larger controllers. Works well up to 70 amps — very low resistance.

Astro Zero Loss high amp connectors
	AST525 AstroFlight Zero Loss Connectors, pair ..... $ 9.90 AVAILABLE NOW Good for up to 50 amps continuous, bursts to 75 amps. Fits wire to 13 gauge. Weight 10g./pair.

3 sizes of Gold single pin connectors
	3 male and 3 female in each package, with insulating heat-shrink tubing. These are primarily for the hookup of the 3 leads of brushless motors, but also fine for battery and charger leads. We estimate that these will handle currents of 10, 25, and 40 Amps respectively. The 3 sizes fit 18, 16, and 14 Ga. wire respectively.
MJ21011 MPJet 1.8mm Gold Connectors, 3 Sets ..... $ 8.00 AVAILABLE NOW MJ21021 MPJet 2.5mm Gold Connectors, 3 Sets ..... $ 8.40 AVAILABLE NOW MJ21031 MPJet 3.5mm Gold Connectors, 3 Sets ..... $ 8.80 AVAILABLE NOW

Heat shrink tubing for electrical connections
	HLA99011 8" Long Heat Shrink Tubing, 3 Sizes ..... $ 2.75 AVAILABLE NOW 1/16, 3/32, 1/8" diameter tube shrink when soldering iron is touched to them. Strengthens and insulates wire connections.

Solder for electric hook-up
	HLA99010 60/40 Rosin Core Solder ..... $ 2.75 AVAILABLE NOW

Banana plugs for charger connections
	HLFK156 Banana Plugs, 1 Red, 1 Black ..... $ 2.20 AVAILABLE NOW Banana plugs for electrical connections to most chargers and field box power panels, 1 red, 1 black.

Pre-Wired Connectors
	The charging leads and motor hookup wires shown below have Deans Ultra, MPJet, JST, or SPEED 400 Connectors soldered in place on them. This saves you soldering time and also helps you to make correct connections when you’re hooking up or charging your system.

Deans Ultra Plug leads
	FMAC709 Charger Lead with Deans Ultra Connector ..... $ 4.90 AVAILABLE NOW Polarized Deans Ultra plug pre-soldered to heavy gauge wire. Use with your Lithium charger to charge packs that have Deans Connectors. 10" pigtail. PC001E Charger Lead with Deans Ultra Connector & Banana Plugs ..... $ 7.80 AVAILABLE NOW Same as FMAC709 but with Banana plugs on the other end.

Connect multiple Lithium packs to increase voltage, capacity or amperage
Parallel Module with genuine Deans Ultra Plugs	DEA7001 Parallel Module with Deans Ultra Connectors ..... $ 12.90 AVAILABLE NOW Plug up to 4 Lithium packs into a parallel connector to increase the capacity. The output capacity (mAh) will be: the capacity of one pack times the number of packs plugged in. By increasing the capacity of the overall pack you also increase the number of amps that can be drawn from the pack. Ex: one PQ21503 pack can be discharged at up to 43 amps, two PQ21503 packs in parallel have a capacity of 4300 mAh and can be discharged at up to 86 amps. The only additional connection required is the connection from the module to the speed control. Packs should be charged individually and not in parallel. Series/Parallel Module PDF Instructions

Series Module with genuine Deans Ultra Plugs	DEA7002 Series Module with Deans Ultra Connectors ..... $ 12.90 AVAILABLE NOW Plug up to 4 Lithium packs into a Series Module to increase the voltage. The output voltage will be: the voltage of one pack times the number of packs plugged in. Ex: To obtain a 10S pack (ten cells in series), plug two 5 cell packs into the Series Module, the resulting output voltage will be 2 times that of the individual pack but the capacity of the pack will remain the same as a single pack. The only additional connection required is the connection from the module to the speed control. Series/Parallel Module PDF Instructions

MPJet pre-wired brushless motor connector sets
MJ20226 - 3 pieces of 1mm silicone insulated wire with MP Jet 1.8mm male connectors attached. 1.8mm female connectors and heatshrink tubing included for installation on your speed control.	MJ20221 - 3 pieces of 1.5mm silicone insulated wire with MP Jet 2.5mm male connectors attached. 2.5mm female connectors and heatshrink tubing included for installation on your speed control. MJ20226 MPJet Pre-Connected 1.8mm 3 Motor Wire Connector Set ..... $ 10.90 AVAILABLE NOW MJ20221 MPJet Pre-Connected 2.5mm 3 Motor Wire Connector Set ..... $ 13.90 AVAILABLE NOW

JST Connector Leads
BAT220 Charger Lead, JST to Deans Ultra ..... $ 4.90 AVAILABLE NOW Useful for chargers that have a JST connector on the output.
BAT221 Charger Lead, JST to SPEED 400 ..... $ 6.45 AVAILABLE NOW Useful for chargers that have a JST connector on the output.
BAT228 JST Connector Lead for Chargers ..... $ 2.90 AVAILABLE NOW 7" length. This is normally used as a charging lead and on speed controllers and motors for micro electrics. Female plastic connector which mates to BAT229.
BAT229 JST Connector Lead for Battery Packs ..... $ 2.90 AVAILABLE NOW 7" length. This is normally used on slow flyer and micro electric aircraft battery packs and speed controllers for motor connection. Male plastic connector which mates to wire harness BAT228.

SPEED 400 Connector Leads
PC001C Charger Wire with SPEED 400 Connector and Banana Plugs ..... $ 6.40 AVAILABLE NOW Plugs into charger HLJE002 and others, and gives properly polarized connection to our pre-wired battery packs for SPEED 400 motor use.
BAT225 SPEED 400 Connector Lead ..... $ 6.10 AVAILABLE NOW A red and a black wire with SPEED 400 connector in place. Can be used as a charging lead to our pre-wired battery packs for SPEED 400 motor use, and also as the wires from the SPEED 400 motor to PCJES012 Jeti Motor Controller with SPEED 400 Connectors.
BAT226 13" SPEED 400 Connector Lead, Yellow, for Motor ..... $ 7.00 AVAILABLE NOW 13" yellow motor wires with SPEED 400 connector soldered in place. Solder the wire ends to your motor. Use as motor leads to your speed control (mates with PCJES012 Jeti motor controller with SPEED 400 connectors).

Connectors and Pre-Wired Connectors