F-86 Sabre electric ducted fan RC jet airplane from Hobby Lobby!

29-1/2" wingspan, 29-1/4" long, 201 sq. in. wing area, 16.5 oz. flying weight. The fan unit is included. Airplane flies well at 2/3 throttle but when you open the throttle to full the speed increase is huge. Airplane is easy to hand-launch with excellent slow speed handling. Open up the throttle and really get moving. Performs inside and outside loops, crisp rolls and tight turns with plenty of power for steep climbs. Hollow molded foam construction with a toughened external layer to resist dings. Ground contact areas are covered in plastic for wear. Wing is removable for transport and access to the ducted fan unit. Ailerons are pre-hinged and pushrods come pre-installed. Fuselage is one piece with internal ducting pre-done. Battery access is through canopy hatch. Includes waterslide decals for five versions and glue. Controls are Aileron, Elevator and Throttle. Check out our flying field photos of the F-86! Optional Drop Tanks also available!

F-86 Sabre PDF Instruction Manual

Parts shot of the Alfa Model F-86 Sabre Jet

Here's how it comes out of the box.
Colorful waterslide decals for 5 versions included.

F-86 Sabre electric RC jet at the flying field

F-86 Sabre at the flying field!

Check out the of the F-86 Sabre!

Online Video Clips -- See F-86 Sabre FLY!
Video clips are done in either the RealPlayer or the Windows Media format. Click either link to download the free software.
2 MB	2.2 MB
With Drop Tanks:	With Drop Tanks:
1.6 MB	1.8 MB

Smooth inlet and outlet ducting and an efficient fan unit make this model perform	Easy access to flight battery and electronics under removable canopy	Single servo in wing attaches to pre-installed aileron pushrods
Nose ducting removes for easy installation of fan unit	Optional drop tanks slip into place on existing pylons	F-86 at the flying field

	Radio System: HTR48725 Hitec Neon 3 SS, Micro 05 Receiver, 2 HS-55 Servos ..... $ 69.90 AVAILABLE NOW
Fan Unit: Included! ALF5101 ducted fan unit included it kit!
	Brushless Motor: MMC5156 "JetScreamer" OUTRUNNER w/21mm Adapter ..... $ 59.00 AVAILABLE NOW Rotor Plug: ALF51013 Alfa Rotor Plug for 3mm Shafts ..... $ 6.90 AVAILABLE NOW
	Brushless Controller: JESAP18W Jeti Advance PLUS 18 Amp Brushless Controller with Program Card ..... $ 69.90 AVAILABLE NOW
	LiPoly Battery Pack: PQ15003 EnerLand 3 Cell 11.1V 1500 mAh Li-Poly Pack ..... $ 51.90 AVAILABLE NOW
	LiPoly Charger: ETC2500 Li-Poly Smart Charger for 1-4 Cells ..... $ 48.80 AVAILABLE NOW Charger Lead: BAT221 JST to SPEED 400 Connector Adapter ..... $ 6.45 AVAILABLE NOW
Accessory Pack: ALF103AP Accessory Pack for F-86 Sabre ..... $ 33.20 1-DEV205 Epoxy 1-GR959 Styrofoam Glue 1-HLFK4003 Connectors 1-JE050B Wire 1-MJ21011 Gold Connectors 1-HLA99010 Solder

Take off from grass or runway with these drop tanks
10-1/2" long, 1-1/2" dia. Kit contains vacu-formed halves for 2 drop tanks, 2 wheel well liners and 2 wooden mounting tabs. The tanks must be assembled and painted. An assembled and painted pair of tanks, without wheels, weighs less than 1 oz.; with wheels the pair weighs about 1-1/4 oz. For sliding off grass, build the tanks only, for taking off pavement and doing touch-and-goes, add a pair of LYT32 wheels.

Drop Tanks: ALF103DT Alfa Model Drop Tank Kit for Alfa F-86 Sabre Jet ..... $ 19.90 AVAILABLE NOW

F-86 Sabre Ducted Fan Jet

Great performing electric ducted fan Jet! INCLUDES the ducted fan!