"Fury" 3D ARF Airplane

44" wingspan, 41-3/8" long, 394 sq. in. wing area, 28 oz. flying weight. A 3D parkflyer airplane that excels at high performance flying in small areas. Fury was designed to be light yet extremely strong. The entire all-wood airframe is covered in transparent covering. All control surfaces are oversized for instant response and control. Servos for the elevator and rudder are located in the rear of the fuselage and connect to the anodized aluminum control horns with stiff carbon pushrods. The cowl and top hatch/canopy are molded plastic, pre-painted and pre-trimmed. Canopy is held on with the included magnets. Landing gear is tough, reinforced plastic with fiberglass wheel pants and light foam wheels. Assembly will take you a few evenings, approximately 6-8 hours. Instructions are photo-illustrated and clear with helpful tips for control throw and exponential settings. CG range for normal and 3D flight is clearly shown. For 4-channels: Aileron (2 servos), Elevator, Rudder and Throttle.

Here's how it comes out of the box!