Micro servo with tough Karbonite gears |
|||
 |
15/16" x 3/8" x 7/8", 8 grams. Similar in size and weight to the HS-55, but a little thinner and with much stronger Karbonite gears. 14 oz./in. of torque at 4.8 volts. Great for fast flying parkflyers and small electric aircraft. |
||
Economy sub-micro servo |
|||
 |
Between 1/3 and 1/4 ounce! (8 grams). L .9 x W .46 x H .95". 16 oz./in. torque. For indoor and slowflyer models. Has Hitec/JR compatible connector. |
||
High torque BB micro servo with strong gears |
|||
 |
 7/8
x 7/16 x 15/16", 16.67 oz. in., torque, 11.2 grams. Karbonite gears
are as strong as metal gears yet have the smoothness of plastic gears.
Ballbearing output shaft for precision and long life. Stronger servo arms.
Mounting ears for conventional mounting or flat mounting, as in a wing. |
||
Micro servo with 25 oz./in. of torque! |
|||
 |
15/16" x 7/16" x 1", 11.2 grams, 25 oz./in. of torque. Heavy-duty resin gears with ball bearings and heavier control arms than the HS-55. Use with fast flying parkflyers and electric micro planes. |
||
Powerful low profile servo |
|||
 |
1-3/4" x 7/8" x 1", 1.23 oz. weight. 61 oz./in. torque at 4.8V, 76 oz./in. torque at 6V. Powerful ball bearing servo, great for mounting in the tail of larger models for elevator and rudder control. Use on airplanes up to 15 pounds. |
||
Hitec servos -- use with any brand radios |
|||
 |
|||
Nearly 70 oz. in. torque for huge aircraft |
|||
 |
1-9/16
x 3/4 x 1-1/2", 1.83 oz. weight. 69.43 oz. in. torque. Full size
servo with huge power for large models. Has Karbonite gears which are
four times stronger than conventional white resin gears. Comes with four
heavy duty servo arms. |
||
Standard size servo with 107 oz./in. of torque |
|||
 |
1-5/8" x 3/4" x 1-1/2", 1.94 oz. (55.2 grams), 107 oz./in. torque @ 4.8V. Dual ballbearing metal gear standard size servo with more than twice the torque of a standard servo. For large control surfaces on larger RC models. |
||
Thin wing servo for gliders and hotliners |
|||
 |
1-3/16" x 3/8" x 1-5/16", 0.84 oz. (24 grams), 42 oz./in. of torque @ 4.8V. Powerful thin metal gear servo with dual ball bearings and side mount tabs for easy installation in wings. Use for ailerons or flaps in gliders and hotliners or anywhere that a powerful thin servo is necessary. |
||
Smaller, lighter and more powerful alternative to standard size servos |
|||
 |
1-1/4" x 5/8" x 1-1/4", 0.95 oz. (27 grams), 54 oz./in. torque @ 4.8V. Nylon gears, top ballbearing. Great in .40 size 3D aircraft where weight is critical. |
||
 |
1-1/4" x 5/8" x 1-1/4", 1.09 oz. (31 grams), 54 oz. in. torque @ 4.8V. Metal gears (16 times stronger than nylon), top ballbearing. Tough gear train to withstand the shocks associated with large control surfaces. Stronger than a standard servo and 40% lighter. |
||
Digital programmable Ultra Torque Titanium servo for giant scale aircraft |
|||
 |
1-1/2" long x 3/4" wide x 1-3/8" high, 2.18 oz. weight, 250 oz./in. torque. Coreless motor, dual ball bearings, Titanium-Alloy gear set with ultra hard servo gear shafts and axial brass case bushings. Suitable for demanding fliers needing extreme servo power and speed in giant scale aircraft. Universal S connector for use with Futaba, Airtronics, Hitec and JR. Comes with rubber grommets, brass bushings and assorted heavy duty servo arms and wheels. Requires the HFT-10 Hitec servo tester to program this servo. |
||
Scanner produces a complete line of servos ranging in size from the 6 gram micro with 12 oz./in. of torque up to servos capable of over 140 oz./in. of torque. Strong metal gear servos are available from 14 gram micros to large-scale digitals. Pricing is comparable to that of the competitions nylon geared servos. |
|||
Quality Ball Bearing and Metal Gear servos at a great price |
|||
 |
13/16" x 3/8" x 7/8", weighs 6 grams (0.22 oz.), 12 oz./in. torque at 4.8V, speed at 4.8V is 0.10 sec./60 deg. at no load, one ball bearing on top. |
||
 |
15/16" x 7/16" x 15/16", weighs 9.6 grams (0.38 oz.), 22 oz./in. torque at 4.8V, speed at 4.8V is 0.12 sec./60 deg. at no load, one ball bearing on top. |
||
 |
15/16" x 7/16" x 7/8", weighs 14 grams (0.44 oz.), 22 oz./in. torque at 4.8V, speed at 4.8V is 0.15 sec./60 deg. at no load, one ball bearing on top. |
||
 |
1-1/4" x 1/2" x 1-1/4", weighs 17 grams (0.59 oz.), 32 oz./in. torque at 4.8V, speed at 4.8V is 0.14 sec./60 deg. at no load, one ball bearing on top. |
||
 |
1-1/4" x 1/2" x 1-1/32", weighs 20.1 grams (0.59 oz.), 40 oz./in. torque at 4.8V, speed at 4.8V is 0.15 sec./60 deg. at no load, metal gears, one ball bearing on top. |
||
 |
1-9/16 x 3/4" x 1-1/2", weighs 48 grams (1.59 oz.), 97 oz./in. torque at 4.8V, speed at 4.8V is 0.11 sec./60 deg. at no load, metal gears, one ball bearing on top. |
||
 |
1-9/16" x 3/4" x 1-1/2", weighs 52 grams (1.73 oz.), 38 oz./in. torque at 4.8V, speed at 4.8V is 0.10 sec./60 deg. at no load, metal gears, one ball bearing on top. |
||
 |
1-9/16" x 3/4" x 1-1/2", weighs 45 grams (1.60 oz.), 130 oz./in. torque at 4.8V, speed at 4.8V is 0.11 sec./60 deg. no load, metal gears, one ball bearing on top. |
||
 |
1-9/16" x 3/4" x 1-1/2", weighs 45 grams (1.60 oz.), 82 oz./in. torque at 4.8V, speed at 4.8V is 0.11 sec./60 deg. no load, metal gears, one ball bearing on top. |
||
Quiet and strong economy micro servo |
|||
 |
7/8" x 7/16" x 15/16", 8 grams, 18 oz./in. of torque. Quality digital servo at an economy price. Comes with 4 servo arm assortment and a JR style plug. |
||
