"Sukhoi 29 S30E" .30 Size ARF

51" wingspan, 51" long, 530 sq. in. wing area, 48 oz. flying weight. Designed by Italian aerobatic pilot Sebastiano Silverstri and based on his Tournament Of Champion’s competition airplane. Lightweight laser cut balsa and plywood structure covered in heat shrink film; canopy comes completely finished including magnetic hold-down pre-installed. Cowl is high gloss epoxyglass pre-trimmed and ready to install. Impressive thrust-to-weight ratio gives this airplane crisp control authority at any airspeed. Elevator and rudder servos are mounted in the rear of the fuselage; short stiff pushrods give precise control inputs. 13mm carbon fiber wing joiner tube is light and strong; there is no wing flexing during extreme 3D flight. Instruction manual is 21 pages long and has 70 black and white photos covering each step of the build, along with suggested control settings and CG recommendation. Expect to spend 6-8 hours build time. Recommended for intermediate to advanced pilots. For 4-channels: Ailerons (2 servos), Elevator, Rudder and Throttle.

Here's how the Red/Green Sukhoi 29 comes out of the box!

Check out the of the Sukhoi 29!