Glider Sailplane Towing and Release Mechanisms from Hobby Lobby!

NEW! Trouble free nose release for large scale gliders
	GR2890 Aero-Tow Nose Release ..... $ 23.90 AVAILABLE NOW Machined of aluminum with brass tube and steel pin. Simple release mechanism that will work reliably every time. You must drill a 12mm hole in the nose of your sailplane and epoxy the release inside the nose. An 8" long 2.5mm pushrod extends back to your release servo (Standard servo required).

NEW! Complete tow release set for tow planes or gliders
	GR1065 Aero-Tow Cable Set, 2 ..... $ 14.50 ESTIMATED ARRIVAL 11/28/08 - Please Preorder Now Two 9-7/8" long 2mm braided steel cables in plastic sheaths with solder-on metal clevises at the servo end and 3mm steel tube reinforcements on the tow release end. There are two sets of cables and release mechanisms, enough for both the tow plane and the sailplane being towed. Requires a servo to operate each release.

Universal Mounting Glider Towhook
	GR627 Glider Towhook ..... $ 4.30 AVAILABLE NOW For any glider to 150" wingspan. 2" x 7/16" x 5/16". Made of strong glass-filled nylon.

This towhook will not break during launch. It's guaranteed!
	HLFK219 Hardened Steel Towhook ..... $ 5.80 AVAILABLE NOW 1" long. Made of 5/32" steel rod. Kavan guarantees this towhook not to break. If it does, they will replace it. Adjustable to any fuselage thickness.

Two sizes: Positive action Glider-nose towline release devices
	MAS002 1.5" Glider-Nose Towline Release ..... $ 9.90 AVAILABLE NOW MAS003 2" Glider-Nose Towline Release ..... $ 10.90 AVAILABLE NOW Two sizes: 1.5" and 2.0" long. Insert towline loop into latch. Operate with a small servo. Forward push releases.

Glider & Sailplane Tow Release